No. 6007, zhenpu road, xiepu town, zhenhai district, Ningbo
The hydraulic system of the elevator is the lifeline of the whole equipment.Once there is a problem, the equipment will be paralyzed and affect the normal operation.Hydraulic power unit of 15L scissor lifting platform, how to prevent the invasion of impurities?
The hydraulic system has many precision parts.In order to maintain normal operation, it is necessary to pay attention to the invasion of solid impurities.The main points for attention are as follows: 1. When cleaning the hydraulic system, the residual debris in the joint must be removed, and then use a large flow.Do not remove impurities from the system, rinse several times to ensure rinse cleanliness.After cleaning, clean filter, replace filter and add new oil.
When refueling, refueling tools should be clean and reliable.In order to improve the refueling speed, the filter at the refueling port should be omitted.A solid invasion must be prevented.
Summary: keeping the hydraulic system clean is an important step in daily maintenance.At the same time, reduce the hydraulic system fault, improve the efficiency of high altitude operation, extend the service life, ensure the operation safety.Therefore, perform maintenance of the hydraulic system to prevent entry of impurities.You should be careful in your work.
Use small hydraulic power unit as lifting platform lifting platform hydraulic power unit
Most high-rise office buildings are equipped with passenger elevators.In order to improve the speed, efficiency and usable floor space of elevators, most high-rise buildings divide elevators into an array, with each group responsible for a number of floors, which are adjusted and scheduled differently according to the use mode.Different times and different floors.There are also very tall skyscrapers where passengers need to use fast-moving stops, first from the ground to the Skylobby lobby, and then to transfer to elevators on different floors to their destination.Some high-rise buildings are equipped with the latest lifts, which can be used to pre-call office floors or designated floors in the lobby.
Hydraulic power unit of lifting platform
Notes for small hydraulic power unit of lifting platform
The lift should carry evenly
When the elevator is working, you must pay attention to the way the goods are placed.Some elevators carry the weight of the goods within the rated load range, but the goods are placed in one or one corner;Lift is the same as overload load, especially aluminum alloy lift;The goods must be placed evenly or as evenly as possible.Place center position.
Address：No. 6007, zhenpu road, xiepu town, zhenhai district, Ningbo