No. 6007, zhenpu road, xiepu town, zhenhai district, Ningbo
About the design of high temperature hydraulic pump station, which often need to take into account all aspects of the relevant factors in advance.Compared with conventional pumping stations, the specific design work is more complex, and it is necessary to check every part of the high temperature to ensure the use effect.As for the control of temperature, it is also necessary to consider the refrigeration and heating mode, so as to improve the controllability of temperature.
In fact, in the whole process of the operation of the hydraulic pump station, which each pump, valve parts often play a very important role.The selection of these components should take into account both the temperature and the pressure requirements.
In addition to the reasonable selection of pumps and valve components, the self-operated flow balance valve should also pay attention to the reasonable control of the electrical system of the hydraulic pump station.That is to say, during the whole system operation process, the electrical components can not be affected by high temperature and maintain normal operation.Since the plunger clearance of the high temperature pump is small and the driving load is large, the starting relay of its motor should meet the requirements of large current.
In addition, in order to ensure the normal operation of the high-temperature type hydraulic pump station, if you want to connect the high-temperature type pump and the motor, then it is necessary to strictly control the coaxiality between the two, it is recommended to maintain within 0.05mm.The coupling can choose the diaphragm type coupling with high temperature resistance.
At the same time also consider some requirements of other aspects, such as on the hydraulic pump station motor cushion, flexible joints and hydraulic hoses, need to be made in accordance with the requirements of high temperature, selection.
The above content of the injection molding machine hydraulic valve manufacturers is mainly a brief analysis of the process of designing high temperature hydraulic pump station, the selection of pumps, valves and electrical control system and other aspects of the requirements.It is hoped that these problems can be seriously considered in the actual design work and appropriate measures can be taken to ensure that the designed high-temperature hydraulic pump station can meet the actual production needs.
Address：No. 6007, zhenpu road, xiepu town, zhenhai district, Ningbo