Welcome to the official website of NINGBO ZHENHAI TIANDI HYDRAULIC CO., LTD.!

Telephone

0574-86301550

Product

Contact us

Contact:Cao jingshan

Phone:13586888865

Tel:0574-86301550

E-mail:cjs@nb-entiandi.com

No. 6007, zhenpu road, xiepu town, zhenhai district, Ningbo

Power unit tddl-10 for large shear lift

Your current location: Home >> Products >> Power unit

Power unit tddl-10 for large shear lift

  • Taxonomy:Power unit

  • Click times:
  • Date of release:2019/11/04
  • Specifications:
  • Type:
  • inquiry
  • introduce

TDDL-10

Power unit for large shear lift

Product description:

This hydraulic power unit adopts zero leakage two-way check valve to realize the complete isolation of two oil lines, so that the two oil lines do not dry up and down

Disturbance is an ideal hydraulic source for multi-cylinder lifting system.This series of power units are widely used in sub - and - master bench lifts.


Appearance:

大剪升降机用动力单元TDDL-10

大剪升降机用动力单元TDDL-10

大剪升降机用动力单元TDDL-10

Function:

大剪升降机用动力单元TDDL-10

1559383613357163.png

Notes:

1. Before installation, it is necessary to ensure that hydraulic components such as oil cylinder, oil pipe and joint are clean and free from any magazine adhesion.

2. The viscosity of hydraulic oil should be 15~68CST. It should be clean and free of impurities.

3. This hydraulic system is suitable for vertical installation. The oil tank is below.

4. When starting the operation system for the first time, check whether the oil in the oil tank is sufficient.

5. After the first 100 hours of use of the system, replace the hydraulic oil, and replace the hydraulic oil every 3000 hours thereafter.

6. If you need different system parameters, such as flow rate, pressure, motor power, etc., please specify when ordering.


Product introduction:

Country of origin:

China

Brand name:

Heaven and earth hydraulic

Certification:

CE

Type:

TDDL-10

Terms of payment and shipment:

Minimum order quantity:

10 sets of

Reference price:

600.00-1500.00 / sets

Package details:

Carton packing, wooden pallet packing

Delivery time:

25 working days after the payment is received in advance

Payment terms:

rmb

Supply capacity:

5500 a month



Power element exists because it can transfer the original produce mechanical energy into liquid flow pressure can provide power to the whole process of hydraulic. Hydraulic pump form the basic structure of the gear pump, plunger pump and the vane pump, the pressure of the liquid can be driven actuators would turn into mechanical energy, driving load system, linear or rotary movement back and forth. Control element is mainly have the effect of control and regulation, make the pressure, direction and flow rate of liquid control. Pressure control valve with pressure reducing valve, relief valve, sequence valve and pressure relay. Flow control valve contains a control valve, throttle valve, shunt valve and so on. The direction controlSystem valve contains a check valve, reversing valve, hydraulic valve, etc. According to different forms of hydraulic control, and can be divided into the control valve, proportional control valve and switch on the control valve of hydraulic power unit turn electricity opportunities prompted oil pump, the pump will suck oil from the oil pump to preview, to convert mechanical energy into the hydraulic oil forces, through hydraulic integrated block can realize the adjustment of the pressure, flow, direction after from outside to take over the pass into the oil cylinder or motor, so that control the rotation direction of the hydraulic power unit, power, size, speed, screw drive hydraulic press to do mechanical work. The structure of hydraulic station is mainly depending on the structure of the pump device,The location of the installation and cooling to distinguish different kind of must be strictly enforced daily maintenance instructions manual, on the basis of the need to strengthen the protection for the hydraulic power unit, especially the motor core parts, such as voltage whether use standardization, whether before and after each use to check whether normal, etc., to do a good job of cleaning the hydraulic power unit, the working frequency of lifting equipment, timely detection of the internal wire is normal, avoid because in a short period of time the ultra frequency using a serious accident.Secondly, in the event of failure, do not disassemble the relevant parts, should timely contact my company!

In the working state, the hydraulic actuator is controlled by the solenoid valve, the system command signal makes the solenoid valve move, control the oil pressure and the energy release of the accumulator, and then control the oil cylinder slide valve, drive the valve through the mechanical transmission mechanism, and implement the quick closing, normal opening and closing and test control.The high pressure cylinder can be fixed on the valve stem or directly used as an actuator.The excess hydraulic oil is returned to the hydraulic station so that the piping system can control several parallel valves with one inlet pipe and one return pipe.This hydraulic station with special drive technology is used to control the actuators of the main steam valve and the turbine bypass system.


The address of this article:http://en.nbzh-tiandi.com/product/807.html

Key word:

Recently browse:

Related products:

Related news:

Contact information:

Contact:Cao jingshan

Phone:13586888865

Tel:0574-86301550

E-mail:cjs@nb-entiandi.com

Address:No. 6007, zhenpu road, xiepu town, zhenhai district, Ningbo


Quick link:

叉车动力单元

  • Service
  • Phone
    18270919270
  • Message
  • Website
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    name
    Contacts
    Telephone
    Telephone
    mailbox
    mailbox
    address
    address